Realtime operation with current control according to your needs
Smart and schedule charging features
Charging insights with analytics View charging logs, consumption and savings
+971-56-802-8763
Menu
Commercial Charging Solution
CITA Smart 22 commercial charger provides fast charging to an electric vehicle, using the chargers on-board three-phase supply. Compliant with the industrial standards, the charger use MID certified meter to ensure accuracy and built-in RCD to secure the safety. Smart 22 can be connected to a charging network with the help of CITA Charger Management System portal.
| Charging Socket | IEC 62196 Type 2, IP54, locking |
| Charging Mode | Mode 3 (IEC 61851-1 / SAE J1772 compliant communication protocol) |
| 6mA DC Trip | Integrated |
| IP Rating | IP54 |
| Operating Temperature | – 30~ + 50°C |
| Product Dimension | 300mm x 300mm x 130mm |
AC Nominal Input/Output
| Phases/Lines | 3 phase + netural+ PE |
| Voltage | 400V±10% AC |
| Frequency | 50/60Hz |
AC Nominal Output
| Voltage | 400V±10% AC |
| Output Power | 22kW |
| Output Current | 6 – 32A programmable |
| Active Load Management | Yes, with external CT clamp (100A max) |
| Dynamic Load Balancing | Yes, via CITA cloud software |
| Warranty | 3-years |
| Communication Method | WiFi, Optional: 4G/Ethernet |
| Mobile App Availability | Yes, Android and iOS App |
| Communication Protocol | OCPP 1.6 – JSON |
via WiFi/4G/Ethernet
with all Type 2 Charging cables
for instant command
compatibility with CT clamp
3 Years
based on convenience
up to 22kW
Realtime operation with current control according to your needs
Smart and schedule charging features
Charging insights with analytics View charging logs, consumption and savings
Electric Vehicle chargers should be installed by a suitably qualified and competent person, taking into consideration all local electrical safety and wiring regulations in your installation country. CITA recommend the installation is by our fully trained and vetted CITA Installation Partners. Full details of these partners can be found on our website.
The installation will vary depending on your electrical infrastructure. However, the basis of installation would be, a new circuit from your electrical board to the electric vehicle charger, with suitable circuit breaker, as deemed by local electrical wiring regulations.
Charging can be started and stopped, by means of a secure RFID card, or through your mobile application, meaning the start and stop procedures are both simple and secure.
Yes, you can create additional app users, whom you will give permissions to use the charger as a separate account user. This allows reporting on energy for all individual users.
Our Development team use charging data for diagnostic purposes.
Our Support Team may access your data in the event of a fault.
With extensive experience in the automotive sector for the past 15+ years in the UAE. We are well-positioned to provide our customers with one-stop-shop solutions for all their electric vehicle needs. From chargers to batteries to spare parts.